G-Power can be applied to some machining processes where are required to separate the cutting residues to maintain coolant/lubricant effectiveness.
• Combining with the circulation tank of cutting and grinding machines can reduce the surface abrasive block (increasing diamond self-sharpening), extend the Diamond-Coated Wire and tools usage life, and improve the workpiece completion quality • This special separating installation can filter most of the residues • After separation, the residues can be easily removed • Improving operation environment cleanliness and avoiding pipeline clogging up • Can be applied to the common use of oil-based or water-based cutting fluids
| Model | UST-3100 | |
| Rotating Speed R.P.M. | 3100 | |
| Maximun Flow | 100 (L/min) | |
| Power Supply | AC 220V/3phase/30A | |
| Operation | Touch Screen | |
| Equipment Size | 650(W)*1380(D)*1768(H) | |
| Weight | 600 Kg | |
| Pneumatic | 5 Kgf/cm2 | |
| Slurry Tank | 140 (L) | |
| Gravity | 1500 | |
| Model | UST-3200 | |
| Rotating Speed R.P.M. | 3100 | |
| Maximun Flow | 200 (L/min) | |
| Power Supply | AC 220V/3phase/30A | |
| Operation | Touch Screen | |
| Equipment Size | 890(W)*1550(D)*2300(H) | |
| Weight | 790 Kg | |
| Pneumatic | 5 Kgf/cm2 | |
| Slurry Tank | 149 (L) | |
| Gravity | 2000 | |